Staffordshire · Lift and re-lay

Lift and re-lay block paving in Burntwood

We repair block paving across Burntwood (WS7). Send photos for a first view, and we will tell you whether it is a quick fix or a base problem.

  • Postcodes WS7
  • £35–£80 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Burntwood: the local picture

In Burntwood, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

How much does a lift and re-lay job cost in Burntwood?

Guide price in Burntwood£35–£80 per m²Including VAT at 20%

Guide price in Burntwood: £35–£80 per m² including VAT, which puts 30 m² re-laid at about £1,050–£2,400. These are West Midlands guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£80 per m²
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Jointing sand and compaction
  • Blocks relaid, new cuts made, edges re-set
  • New screeded laying course
  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Sub-base repaired or rebuilt where needed

How we find the cause

  • How much of the area needs lifting to blend the repair
  • Falls, so water does not collect again
  • Condition and thickness of your existing blocks
  • Trees, roots and past trenches
  • What caused the dip or movement: base, laying course, edging or drains

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Lift and re-lay in Burntwood: questions

Do you cover Lichfield, Cannock and Rugeley?

Yes. We cover Burntwood and the places around it, including Lichfield, Cannock and Rugeley, and the rest of Staffordshire.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a lift and re-lay job cost in Burntwood?

Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.

Lift and re-lay near Burntwood

Nearby towns we cover for lift and re-lay, and lift and re-lay across Staffordshire:

Other block paving services in Burntwood

Or see all block paving services in Burntwood.

Next step

Get a guide price in two minutes

Ready to talk about your lift and re-lay job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote