Somerset · Block paved driveways

Block paving driveways in Frome

If you are in Frome (BA11, BA3) and want a block paved driveway, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes BA11, BA3
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Frome: the local picture

Homes in Frome include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a block paved driveway cost in Frome?

Guide price in Frome£85–£140 per m²Including VAT at 20%

Most block paved driveway quotes in the South West fall within £85–£140 per m² including VAT. A 50 m² double drive would usually be about £4,250–£7,000, with any extras listed separately on your quote.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.

  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Survey, measurements and a written, itemised quote
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Crushed-stone sub-base laid in layers and compacted

Before we price your block paved driveway

  • Ground conditions under the old surface and how deep the sub-base must be
  • Steps, thresholds and door heights
  • Where an electric vehicle charger cable might run
  • Whether front-garden planning rules apply
  • Existing manhole and inspection covers, and whether to recess them

Rules for front drives in Frome

Frome is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Block paved driveways in Frome: questions

Can you match the blocks to my house in Frome?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Bath, Nailsea and Yeovil?

Yes. We cover Frome and the places around it, including Bath, Nailsea and Yeovil, and the rest of Somerset.

Block paved driveways near Frome

Nearby towns we cover for block paved driveways, and block paved driveways across Somerset:

Other block paving services in Frome

Or see all block paving services in Frome.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote