Block paving sealing in Frome: what to expect
In Frome, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a block paving sealing job cost in Frome?
In the South West, a block paving sealing job usually costs £5–£15 per m² including VAT. For a 50 m² drive, that is roughly £250–£750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Second coat where the product requires it
- Drying time and a date when cars can return
What we look at first in Frome
- Type of block and its age
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Frome: questions
How much does a block paving sealing job cost in Frome?
Guide price for Frome: £5–£15 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Frome be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Frome
Nearby towns we cover for sealing, and sealing across Somerset:
