Sunken and rutted block paving in Frome: the local picture
In Frome, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a sunken area repair cost in Frome?
In the South West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Blocks lifted, cleaned and stacked for re-use
- New laying course screeded to the correct level and falls
- Same blocks relaid, re-jointed and compacted
- Sub-base dug out and rebuilt where it has failed
- Investigation of the cause (drain, sub-base, laying course, edging)
How we find the cause
- Falls, so water does not collect again
- How much of the area needs lifting to blend the repair
- Trees, roots and past trenches
- Condition and thickness of your existing blocks
- Whether a drain or gully is leaking under the paving
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sunken paving in Frome: questions
How much does a sunken area repair cost in Frome?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Bath, Nailsea and Yeovil?
Yes. We cover Frome and the places around it, including Bath, Nailsea and Yeovil, and the rest of Somerset.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Sunken paving near Frome
Nearby towns we cover for sunken paving, and sunken paving across Somerset:
- Sunken paving in Bath
- Sunken paving in Nailsea
- Sunken paving in Yeovil
- Sunken paving in Warminster
- Sunken paving in Trowbridge
