Somerset · Repairs

Block paving repairs in Frome

If your drive or patio in Frome has dips, ruts or broken blocks, we can usually re-use your own blocks so the repair matches.

  • Postcodes BA11, BA3
  • £200–£650 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

Planning a block paving repair in Frome

Frome is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Sloping plots are common in the South West, which affects edging, steps and where the water runs.

How much does a block paving repair cost in Frome?

Guide price in Frome£200–£650Including VAT at 20%

Guide price in Frome: £200–£650 including VAT. These are South West guide figures; the survey or your photos confirm the real price before you commit.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our repairs service

Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.

  • Diagnosis from photos or a visit
  • Replacement blocks matched as closely as possible, or sound blocks re-used
  • Re-jointing and compaction of the repaired area
  • Laying course corrected and re-screeded
  • Damaged blocks cut out without breaking neighbours

How we find the cause

  • What caused the dip or movement: base, laying course, edging or drains
  • Trees, roots and past trenches
  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving
  • Falls, so water does not collect again

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repairs in Frome: questions

How much does a block paving repair cost in Frome?

Our guide is £200–£650 including VAT. Small repairs are often priced from photos.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Do you cover Bath, Nailsea and Yeovil?

Yes. We cover Frome and the places around it, including Bath, Nailsea and Yeovil, and the rest of Somerset.

Repairs near Frome

Nearby towns we cover for repairs, and repairs across Somerset:

Other block paving services in Frome

Or see all block paving services in Frome.

Next step

Get a guide price in two minutes

Ready to talk about your block paving repair? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote