Sunken and rutted block paving in Yate: the local picture
In and around Yate, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a sunken area repair cost in Yate?
In the South West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What does a sunken area repair involve?
Common causes are a sub-base that was too thin or not compacted, a laying course that was too thick, water washing sand out through a broken drain, or a trench that was never properly filled. Re-levelling means lifting the blocks in and around the dip, finding and fixing the cause, rebuilding and compacting the layers, and relaying the same blocks so they match.
- Same blocks relaid, re-jointed and compacted
- Sub-base dug out and rebuilt where it has failed
- Investigation of the cause (drain, sub-base, laying course, edging)
- New laying course screeded to the correct level and falls
- Blocks lifted, cleaned and stacked for re-use
What we look at first in Yate
- What caused the dip or movement: base, laying course, edging or drains
- How much of the area needs lifting to blend the repair
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
- Falls, so water does not collect again
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sunken paving in Yate: questions
How much does a sunken area repair cost in Yate?
Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Yate without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Sunken paving near Yate
Nearby towns we cover for sunken paving, and sunken paving across Gloucestershire:
- Sunken paving in Mangotsfield
- Sunken paving in Kingswood
- Sunken paving in Stroud
- Sunken paving in Cirencester
- Sunken paving in Gloucester
