Block paving cleaning in Yate: what to expect
Around Yate, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a block paving cleaning job cost in Yate?
Most block paving cleaning job quotes in the South West fall within £2.50–£5 per m² including VAT. A 50 m² drive would usually be about £125–£250, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Rinse down of edges, steps and walls
- Pre-treatment where needed
- Kiln-dried sand brushed in once dry (re-sanding package)
- Weeds and moss removed from the joints
- Optional biocide and sealer
Before we price your block paving cleaning job
- How much joint sand is left
- Walls, doors and planting to protect
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Moss, algae, weeds and oil staining
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Cleaning in Yate: questions
Do you cover Mangotsfield, Kingswood and Stroud?
Yes. We cover Yate and the places around it, including Mangotsfield, Kingswood and Stroud, and the rest of Gloucestershire.
How much does a block paving cleaning job cost in Yate?
Guide price for Yate: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Cleaning near Yate
Nearby towns we cover for cleaning, and cleaning across Gloucestershire:
- Cleaning in Mangotsfield
- Cleaning in Kingswood
- Cleaning in Stroud
- Cleaning in Cirencester
- Cleaning in Gloucester
