Gloucestershire · Cleaning

Block paving cleaning in Stroud

Tired block paving in Stroud rarely needs replacing. A deep clean, fresh jointing sand and, if you want it, a sealer, make most drives look years younger.

  • Postcodes GL6, GL5, GL10
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Stroud: what to expect

Stroud is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Sloping plots are common in the South West, which affects edging, steps and where the water runs.

How much does a block paving cleaning job cost in Stroud?

Guide price in Stroud£2.50–£5 per m²Including VAT at 20%

For Stroud, our guide is £2.50–£5 per m² including VAT, so a 50 m² drive is likely to be £125–£250. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our cleaning service

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed
  • Optional biocide and sealer
  • Rinse down of edges, steps and walls
  • Rotary surface clean at a pressure that will not blow out the joints

How we find the cause

  • Whether any blocks are loose or sunken first
  • How much joint sand is left
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Type of block and its age
  • Which sealer finish suits a slope or patio

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Cleaning in Stroud: questions

Do you cover Gloucester, Cirencester and Cheltenham?

Yes. We cover Stroud and the places around it, including Gloucester, Cirencester and Cheltenham, and the rest of Gloucestershire.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Stroud?

Guide price for Stroud: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

How often should block paving in Stroud be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Cleaning near Stroud

Nearby towns we cover for cleaning, and cleaning across Gloucestershire:

Other block paving services in Stroud

Or see all block paving services in Stroud.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Stroud, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote