Planning a block paved patio in Yate
Around Yate, gardens are often larger, so falls, steps and where the water goes need planning.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a block paved patio cost in Yate?
Guide price in Yate: £80–£140 per m² including VAT, which puts a 20 m² patio at about £1,850–£3,200. These are South West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Block paved patio (concrete block) | £80–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Step with block or brick riser and paved tread | £180–£350 per step |
| Typical channel drain run | £350–£1,000 |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our patios service
A block paved patio is a garden seating or dining area paved with concrete or clay blocks on a compacted base. Because a patio carries people and furniture rather than cars, the sub-base is thinner than for a drive, but the falls, edging and drainage matter just as much.
- Layout marked out with you, including steps and doors
- Dig-out and compacted sub-base (around 100 mm for foot traffic)
- Falls away from the house and doors
- Blocks in your pattern, edges and cuts
- Jointing sand and compaction
What the survey covers
- Trees and roots near the paving
- Block range, colour, pattern and border to suit the house
- Access for a mini-digger and how waste leaves the garden
- Ground conditions and how deep the dig must be
- Where rain will go: falls away from the house, onto lawn or borders, or into a channel
Do you need permission for a block paved patio in Yate?
A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.
Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Patios in Yate: questions
How much does a block paved patio cost in Yate?
Our guide for Yate is £80–£140 per m² including VAT, so a 20 m² patio is usually about £1,850–£3,200. Your fixed price follows the survey.
What happens to my old patio or lawn?
Old slabs, concrete or turf are dug out and taken away, listed as its own line on your quote.
Is the survey in Yate free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can the paving be level with the back door?
Paving normally sits at least 150 mm below the damp-proof course. A level step-out needs a drainage channel against the house and careful detailing, which we agree on the survey.
Patios near Yate
Nearby towns we cover for patios, and patios across Gloucestershire:
