Gloucestershire · Sunken paving

Sunken and rutted block paving in Kingswood

From the BS postcodes to Gloucestershire, we put tired block paving right without breaking out the whole drive.

  • Postcodes BS15, BS30
  • £300–£1,200 inc VAT
  • Free survey for new paving
Older block paved driveway with a sunken dip and a puddle in the wheel track

Planning a sunken area repair in Kingswood

Homes in Kingswood include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a sunken area repair cost in Kingswood?

Guide price in Kingswood£300–£1,200Including VAT at 20%

Most sunken area repair quotes in the South West fall within £300–£1,200 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Sunken or rutted patch repaired£300–£1,200
Small repair (a few blocks or a short trench)£200–£650
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.

  • Sub-base dug out and rebuilt where it has failed
  • Same blocks relaid, re-jointed and compacted
  • Blocks lifted, cleaned and stacked for re-use
  • Investigation of the cause (drain, sub-base, laying course, edging)
  • New laying course screeded to the correct level and falls

How we find the cause

  • Whether the edging has moved or was never set in concrete
  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving
  • Falls, so water does not collect again
  • What caused the dip or movement: base, laying course, edging or drains

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Sunken paving in Kingswood: questions

Can you repair block paving in Kingswood without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Do you cover Mangotsfield, Yate and Stroud?

Yes. We cover Kingswood and the places around it, including Mangotsfield, Yate and Stroud, and the rest of Gloucestershire.

How much does a sunken area repair cost in Kingswood?

Our guide is £300–£1,200 including VAT. Small repairs are often priced from photos.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Sunken paving near Kingswood

Nearby towns we cover for sunken paving, and sunken paving across Gloucestershire:

Other block paving services in Kingswood

Or see all block paving services in Kingswood.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Kingswood, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote