Planning a block paving sealing job in Kingswood
Homes in Kingswood include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a block paving sealing job cost in Kingswood?
For Kingswood, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
How we find the cause
- Whether any blocks are loose or sunken first
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Type of block and its age
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Sealing in Kingswood: questions
How often should block paving in Kingswood be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Mangotsfield, Yate and Stroud?
Yes. We cover Kingswood and the places around it, including Mangotsfield, Yate and Stroud, and the rest of Gloucestershire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Kingswood
Nearby towns we cover for sealing, and sealing across Gloucestershire:
- Sealing in Mangotsfield
- Sealing in Yate
- Sealing in Stroud
- Sealing in Bath
- Sealing in Nailsea
- Sealing in Portishead
