Planning a block paving sealing job in Mangotsfield
Mangotsfield is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a block paving sealing job cost in Mangotsfield?
In the South West, a block paving sealing job usually costs £5–£15 per m² including VAT. For a 50 m² drive, that is roughly £250–£750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
Before we price your block paving sealing job
- How much joint sand is left
- Whether any blocks are loose or sunken first
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Moss, algae, weeds and oil staining
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Mangotsfield: questions
Do you cover Kingswood, Yate and Stroud?
Yes. We cover Mangotsfield and the places around it, including Kingswood, Yate and Stroud, and the rest of Gloucestershire.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving sealing job cost in Mangotsfield?
Guide price for Mangotsfield: £5–£15 per m² including VAT, with a minimum charge for small areas.
How often should block paving in Mangotsfield be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Mangotsfield
Nearby towns we cover for sealing, and sealing across Gloucestershire:
- Sealing in Kingswood
- Sealing in Yate
- Sealing in Stroud
- Sealing in Bath
- Sealing in Portishead
- Sealing in Nailsea
