Planning a sunken area repair in Cirencester
Around Cirencester, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a sunken area repair cost in Cirencester?
In the South West, a sunken area repair usually costs £300–£1,200 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sunken or rutted patch repaired | £300–£1,200 |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sunken block paving is an area that has dropped below the surrounding surface, often as wheel ruts where cars turn, a dip near a manhole or drain, or a hollow where water sits after rain. The blocks themselves are usually fine; the problem is underneath.
- Blocks lifted, cleaned and stacked for re-use
- Sub-base dug out and rebuilt where it has failed
- New laying course screeded to the correct level and falls
- Investigation of the cause (drain, sub-base, laying course, edging)
- Same blocks relaid, re-jointed and compacted
Before we price your sunken area repair
- Whether a drain or gully is leaking under the paving
- Trees, roots and past trenches
- How much of the area needs lifting to blend the repair
- Condition and thickness of your existing blocks
- Whether the edging has moved or was never set in concrete
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Sunken paving in Cirencester: questions
Do you cover Stroud, Cheltenham and Gloucester?
Yes. We cover Cirencester and the places around it, including Stroud, Cheltenham and Gloucester, and the rest of Gloucestershire.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you repair block paving in Cirencester without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Sunken paving near Cirencester
Nearby towns we cover for sunken paving, and sunken paving across Gloucestershire:
- Sunken paving in Stroud
- Sunken paving in Cheltenham
- Sunken paving in Gloucester
- Sunken paving in Tewkesbury
- Sunken paving in Yate
