Block paving repairs in Cirencester: the local picture
Cirencester is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Sloping plots are common in the South West, which affects edging, steps and where the water runs.
How much does a block paving repair cost in Cirencester?
Guide price in Cirencester: £200–£650 including VAT. These are South West guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay on a sound base | £35–£80 per m² |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our repairs service
Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.
- Laying course corrected and re-screeded
- Replacement blocks matched as closely as possible, or sound blocks re-used
- Diagnosis from photos or a visit
- Damaged blocks cut out without breaking neighbours
- Re-jointing and compaction of the repaired area
Before we price your block paving repair
- Trees, roots and past trenches
- Whether the edging has moved or was never set in concrete
- Falls, so water does not collect again
- Whether a drain or gully is leaking under the paving
- How much of the area needs lifting to blend the repair
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repairs in Cirencester: questions
Can you repair block paving in Cirencester without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Do you cover Stroud, Cheltenham and Gloucester?
Yes. We cover Cirencester and the places around it, including Stroud, Cheltenham and Gloucester, and the rest of Gloucestershire.
How much does a block paving repair cost in Cirencester?
Our guide is £200–£650 including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Repairs near Cirencester
Nearby towns we cover for repairs, and repairs across Gloucestershire:
