Gloucestershire · Block paved driveways

Block paving driveways in Cirencester

Block paving driveways in Cirencester: built on a properly dug and compacted base, edged in concrete and laid to falls that take water away from the house.

  • Postcodes GL7
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Block paving driveways in Cirencester: the local picture

In and around Cirencester, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Sloping plots are common in the South West, which affects edging, steps and where the water runs.

How much does a block paved driveway cost in Cirencester?

Guide price in Cirencester£85–£140 per m²Including VAT at 20%

For Cirencester, our guide is £85–£140 per m² including VAT, so a 50 m² double drive is likely to be £4,250–£7,000. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Crushed-stone sub-base laid in layers and compacted
  • Removal of the old surface and soil to the agreed depth, with waste taken away
  • Cuts at edges, around covers and against the house
  • Edge restraints or kerbs bedded and haunched in concrete

What we check on a Cirencester survey

  • The kerb: is it already dropped, and is it wide enough?
  • Existing manhole and inspection covers, and whether to recess them
  • Trees and roots near the drive
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Block range, thickness, colour and pattern to suit the house

Rules for front drives in Cirencester

Cirencester is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Block paved driveways in Cirencester: questions

Can you match the blocks to my house in Cirencester?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

How much does a block paved driveway cost in Cirencester?

Our guide for Cirencester is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Stroud, Cheltenham and Gloucester?

Yes. We cover Cirencester and the places around it, including Stroud, Cheltenham and Gloucester, and the rest of Gloucestershire.

Block paved driveways near Cirencester

Nearby towns we cover for block paved driveways, and block paved driveways across Gloucestershire:

Other block paving services in Cirencester

Or see all block paving services in Cirencester.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Cirencester.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote