Warwickshire · Replace an old drive

Replacing tarmac or concrete with block paving in Kenilworth

Our replacing tarmac or concrete with block paving service covers Kenilworth and nearby Warwick, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes CV8
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Kenilworth

Around Kenilworth, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.

How much does a replacement block drive cost in Kenilworth?

Guide price in Kenilworth£95–£180 per m²Including VAT at 20%

In the West Midlands, a replacement block drive usually costs £95–£180 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,300–£8,100. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Assessment of the old base: keep, top up or replace
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Levels set below the damp-proof course with falls away from the house
  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive

Before we price your replacement block drive

  • Ground conditions under the old surface and how deep the sub-base must be
  • Trees and roots near the drive
  • Where an electric vehicle charger cable might run
  • Access for a mini-digger, skip or grab lorry
  • Whether front-garden planning rules apply

Do you need permission in Kenilworth?

Kenilworth is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Replace an old drive in Kenilworth: questions

How much does a replacement block drive cost in Kenilworth?

Our guide for Kenilworth is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.

Do I need planning permission for a replacement block drive in Kenilworth?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Is the survey in Kenilworth free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Replace an old drive near Kenilworth

Nearby towns we cover for replace an old drive, and replace an old drive across Warwickshire:

Other block paving services in Kenilworth

Or see all block paving services in Kenilworth.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Kenilworth.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote