Warwickshire · Replace an old drive

Replacing tarmac or concrete with block paving in Warwick

Our replacing tarmac or concrete with block paving service covers Warwick and nearby Leamington Spa, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes CV34, CV35
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Replacing tarmac or concrete with block paving in Warwick: the local picture

In Warwick, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.

How much does a replacement block drive cost in Warwick?

Guide price in Warwick£95–£180 per m²Including VAT at 20%

For Warwick, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • New edging, sub-base where needed, and the block drive
  • Assessment of the old base: keep, top up or replace
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry

Before we price your replacement block drive

  • The kerb: is it already dropped, and is it wide enough?
  • Steps, thresholds and door heights
  • Trees and roots near the drive
  • Edges against lawns, beds, walls and neighbours
  • Block range, thickness, colour and pattern to suit the house

Rules for front drives in Warwick

Warwick is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Replace an old drive in Warwick: questions

How much does a replacement block drive cost in Warwick?

Our guide for Warwick is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.

Do I need planning permission for a replacement block drive in Warwick?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Can you match the blocks to my house in Warwick?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Is the survey in Warwick free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Replace an old drive near Warwick

Nearby towns we cover for replace an old drive, and replace an old drive across Warwickshire:

Other block paving services in Warwick

Or see all block paving services in Warwick.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote