Planning a permeable block drive in Kenilworth
Around Kenilworth, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.
How much does a permeable block drive cost in Kenilworth?
Expect permeable block drives in Kenilworth to come in at around £105–£170 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £5,250 and £8,500.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Edge restraints and any overflow or outlet the design needs
- Open-graded crushed stone (no fines) laid and compacted in layers
- Geotextile layer where the design needs one
- Deeper dig-out for the open-graded sub-base
- Grit laying course and permeable blocks with grit-filled joints
What we check on a Kenilworth survey
- Existing manhole and inspection covers, and whether to recess them
- Where an electric vehicle charger cable might run
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
- Whether front-garden planning rules apply
Do you need permission in Kenilworth?
Kenilworth is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Permeable paving in Kenilworth: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Kenilworth?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a permeable block drive in Kenilworth?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Kenilworth
Nearby towns we cover for permeable paving, and permeable paving across Warwickshire:
- Permeable paving in Warwick
- Permeable paving in Leamington Spa
- Permeable paving in Bedworth
- Permeable paving in Stratford-upon-Avon
- Permeable paving in Nuneaton
- Permeable paving in Rugby
