Nottinghamshire · Replace an old drive

Replacing tarmac or concrete with block paving in Worksop

Thinking about replacement block drives in Worksop? We survey, specify and build them for homeowners across Worksop and the surrounding S postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes S80, S81
  • £95–£180 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Worksop

In Worksop, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.

How much does a replacement block drive cost in Worksop?

Guide price in Worksop£95–£180 per m²Including VAT at 20%

Most replacement block drive quotes in the East Midlands fall within £95–£180 per m² including VAT. A 45 m² replacement drive would usually be about £4,300–£8,100, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£95–£180 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our replace an old drive service

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace

What we check on a Worksop survey

  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Trees and roots near the drive
  • Existing manhole and inspection covers, and whether to recess them
  • Steps, thresholds and door heights
  • Where an electric vehicle charger cable might run

Do you need permission in Worksop?

Worksop is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Replace an old drive in Worksop: questions

Is the survey in Worksop free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How much does a replacement block drive cost in Worksop?

Our guide for Worksop is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do you cover Retford, Mansfield and Sutton-in-Ashfield?

Yes. We cover Worksop and the places around it, including Retford, Mansfield and Sutton-in-Ashfield, and the rest of Nottinghamshire.

Replace an old drive near Worksop

Nearby towns we cover for replace an old drive, and replace an old drive across Nottinghamshire:

Other block paving services in Worksop

Or see all block paving services in Worksop.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote