What to know before a replacement block drive in Newark-on-Trent
Homes in Newark-on-Trent include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
How much does a replacement block drive cost in Newark-on-Trent?
For Newark-on-Trent, our guide is £95–£180 per m² including VAT, so a 45 m² replacement drive is likely to be £4,300–£8,100. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £95–£180 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- New edging, sub-base where needed, and the block drive
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
- Assessment of the old base: keep, top up or replace
Before we price your replacement block drive
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- The kerb: is it already dropped, and is it wide enough?
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
- Ground conditions under the old surface and how deep the sub-base must be
Do you need permission in Newark-on-Trent?
Newark-on-Trent is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Replace an old drive in Newark-on-Trent: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a replacement block drive cost in Newark-on-Trent?
Our guide for Newark-on-Trent is £95–£180 per m² including VAT, so a 45 m² replacement drive is usually about £4,300–£8,100. Your fixed price follows the survey.
Can you match the blocks to my house in Newark-on-Trent?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Arnold, Nottingham and West Bridgford?
Yes. We cover Newark-on-Trent and the places around it, including Arnold, Nottingham and West Bridgford, and the rest of Nottinghamshire.
Replace an old drive near Newark-on-Trent
Nearby towns we cover for replace an old drive, and replace an old drive across Nottinghamshire:
- Replace an old drive in Arnold
- Replace an old drive in Nottingham
- Replace an old drive in West Bridgford
- Replace an old drive in Hucknall
- Replace an old drive in Mansfield
- Replace an old drive in Kirkby-in-Ashfield
