Planning a permeable block drive in Worksop
In Worksop, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.
How much does a permeable block drive cost in Worksop?
Most permeable block drive quotes in the East Midlands fall within £105–£170 per m² including VAT. A 50 m² drive would usually be about £5,250–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Deeper dig-out for the open-graded sub-base
- Ground check: how well the soil drains and how high the water table sits
- Grit laying course and permeable blocks with grit-filled joints
- Edge restraints and any overflow or outlet the design needs
- Geotextile layer where the design needs one
What the survey covers
- Steps, thresholds and door heights
- Where rain will go: falls, lawn, border, channel or soakaway
- Block range, thickness, colour and pattern to suit the house
- Edges against lawns, beds, walls and neighbours
- Trees and roots near the drive
Do you need permission in Worksop?
Worksop is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Permeable paving in Worksop: questions
Do I need planning permission for a permeable block drive in Worksop?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Is the survey in Worksop free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Can you match the blocks to my house in Worksop?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a permeable block drive cost in Worksop?
Our guide for Worksop is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Permeable paving near Worksop
Nearby towns we cover for permeable paving, and permeable paving across Nottinghamshire:
- Permeable paving in Retford
- Permeable paving in Mansfield
- Permeable paving in Sutton-in-Ashfield
- Permeable paving in Kirkby-in-Ashfield
- Permeable paving in Hucknall
- Permeable paving in Newark-on-Trent
