Lincolnshire · Replace an old drive

Replacing tarmac or concrete with block paving in Cleethorpes

If you are in Cleethorpes (DN35, DN36) and want a replacement block drive, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes DN35, DN36
  • £85–£160 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Replacing tarmac or concrete with block paving in Cleethorpes: the local picture

Cleethorpes is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.

How much does a replacement block drive cost in Cleethorpes?

Guide price in Cleethorpes£85–£160 per m²Including VAT at 20%

Most replacement block drive quotes in Yorkshire and the Humber fall within £85–£160 per m² including VAT. A 45 m² replacement drive would usually be about £3,850–£7,300, with any extras listed separately on your quote.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£85–£160 per m²
Breaking out an old surface£9–£35 per m²
Edging or kerb, bedded and haunched£18–£45 per metre
Typical channel drain run£320–£900
Dropped kerb (vehicle crossover) construction£900–£2,700

Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Drainage added where the old drive sent water to the house or road
  • New edging, sub-base where needed, and the block drive
  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry
  • Assessment of the old base: keep, top up or replace

Before we price your replacement block drive

  • Ground conditions under the old surface and how deep the sub-base must be
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • The kerb: is it already dropped, and is it wide enough?
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Rules for front drives in Cleethorpes

Cleethorpes is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Replace an old drive in Cleethorpes: questions

Do I need planning permission for a replacement block drive in Cleethorpes?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Is the survey in Cleethorpes free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

How much does a replacement block drive cost in Cleethorpes?

Our guide for Cleethorpes is £85–£160 per m² including VAT, so a 45 m² replacement drive is usually about £3,850–£7,300. Your fixed price follows the survey.

Do you cover Grimsby, Hull and Brough?

Yes. We cover Cleethorpes and the places around it, including Grimsby, Hull and Brough, and the rest of Lincolnshire.

Replace an old drive near Cleethorpes

Nearby towns we cover for replace an old drive, and replace an old drive across Lincolnshire:

Other block paving services in Cleethorpes

Or see all block paving services in Cleethorpes.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Cleethorpes, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote