Lincolnshire · Repairs

Block paving repairs in Cleethorpes

When a block drive in Cleethorpes or nearby Grimsby starts to dip or rattle, the blocks are rarely the problem; the bed and base usually are.

  • Postcodes DN35, DN36
  • £180–£590 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

Block paving repairs in Cleethorpes: what to expect

In Cleethorpes, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.

How much does a block paving repair cost in Cleethorpes?

Guide price in Cleethorpes£180–£590Including VAT at 20%

Most block paving repair quotes in Yorkshire and the Humber fall within £180–£590 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£180–£590
Sunken or rutted patch repaired£270–£1,100
Lift and re-lay on a sound base£30–£70 per m²
Lift and re-lay with sub-base rebuilt£55–£100 per m²

Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving repair involve?

Most small repairs can be priced from clear photos and a measurement. If the problem is a symptom of something deeper, such as a failed edge or a soft sub-base, we will say so rather than patching over it, and price the proper fix alongside.

  • Re-jointing and compaction of the repaired area
  • Diagnosis from photos or a visit
  • Laying course corrected and re-screeded
  • Damaged blocks cut out without breaking neighbours
  • Replacement blocks matched as closely as possible, or sound blocks re-used

What we look at first in Cleethorpes

  • Falls, so water does not collect again
  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving
  • Trees, roots and past trenches
  • Whether the edging has moved or was never set in concrete

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repairs in Cleethorpes: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a block paving repair cost in Cleethorpes?

Our guide is £180–£590 including VAT. Small repairs are often priced from photos.

Can you repair block paving in Cleethorpes without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Repairs near Cleethorpes

Nearby towns we cover for repairs, and repairs across Lincolnshire:

Other block paving services in Cleethorpes

Or see all block paving services in Cleethorpes.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Cleethorpes.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote