Planning a block paving repair in Hull
Hull has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.
How much does a block paving repair cost in Hull?
In Yorkshire and the Humber, a block paving repair usually costs £180–£590 including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Small repair (a few blocks or a short trench) | £180–£590 |
| Sunken or rutted patch repaired | £270–£1,100 |
| Lift and re-lay on a sound base | £30–£70 per m² |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving repair involve?
Block paving repairs fix local damage: cracked or broken blocks, loose blocks that rock, oil or rust stains, and trenches left after a utility company or builder has dug through the drive. Because each block is separate, a damaged area can be lifted, the bed corrected and the blocks relaid or replaced, without breaking out the whole drive.
- Laying course corrected and re-screeded
- Replacement blocks matched as closely as possible, or sound blocks re-used
- Re-jointing and compaction of the repaired area
- Diagnosis from photos or a visit
- Damaged blocks cut out without breaking neighbours
What we look at first in Hull
- Whether the edging has moved or was never set in concrete
- Whether a drain or gully is leaking under the paving
- Condition and thickness of your existing blocks
- Trees, roots and past trenches
- Replacement blocks or hidden blocks to swap in
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Repairs in Hull: questions
Can you repair block paving in Hull without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
How much does a block paving repair cost in Hull?
Our guide is £180–£590 including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Repairs near Hull
Nearby towns we cover for repairs, and repairs across East Riding of Yorkshire:
