Block paving driveways in Hull: the local picture
Hull has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.
How much does a block paved driveway cost in Hull?
In Yorkshire and the Humber, a block paved driveway usually costs £75–£125 per m² including VAT. For a 50 m² double drive, that is roughly £3,850–£6,300. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £75–£125 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Edge restraints or kerbs bedded and haunched in concrete
- Survey, measurements and a written, itemised quote
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Cuts at edges, around covers and against the house
Before we price your block paved driveway
- Existing manhole and inspection covers, and whether to recess them
- Whether front-garden planning rules apply
- Block range, thickness, colour and pattern to suit the house
- Ground conditions under the old surface and how deep the sub-base must be
- Where rain will go: falls, lawn, border, channel or soakaway
Planning and kerb rules in Hull
Hull is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Block paved driveways in Hull: questions
Can you match the blocks to my house in Hull?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Is the survey in Hull free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a block paved driveway cost in Hull?
Our guide for Hull is £75–£125 per m² including VAT, so a 50 m² double drive is usually about £3,850–£6,300. Your fixed price follows the survey.
Block paved driveways near Hull
Nearby towns we cover for block paved driveways, and block paved driveways across East Riding of Yorkshire:
- Block paved driveways in Beverley
- Block paved driveways in Brough
- Block paved driveways in Driffield
- Block paved driveways in Goole
- Block paved driveways in Bridlington
