Lincolnshire · Lift and re-lay

Lift and re-lay block paving in Cleethorpes

Lift and re-lay block paving in Cleethorpes: most dips and loose blocks are a base or edging problem, not a block problem, so that is what we fix.

  • Postcodes DN35, DN36
  • £30–£70 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Planning a lift and re-lay job in Cleethorpes

Cleethorpes is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.

How much does a lift and re-lay job cost in Cleethorpes?

Guide price in Cleethorpes£30–£70 per m²Including VAT at 20%

In Yorkshire and the Humber, a lift and re-lay job usually costs £30–£70 per m² including VAT. For 30 m² re-laid, that is roughly £950–£2,150. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Lift and re-lay on a sound base£30–£70 per m²
Small repair (a few blocks or a short trench)£180–£590
Sunken or rutted patch repaired£270–£1,100
Lift and re-lay with sub-base rebuilt£55–£100 per m²

Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • Blocks relaid, new cuts made, edges re-set
  • Sub-base repaired or rebuilt where needed
  • Jointing sand and compaction
  • New screeded laying course
  • Survey of the blocks: thickness, damage and whether they are worth re-using

How we find the cause

  • Replacement blocks or hidden blocks to swap in
  • Whether a drain or gully is leaking under the paving
  • Trees, roots and past trenches
  • Falls, so water does not collect again
  • How much of the area needs lifting to blend the repair

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

How we work

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Lift and re-lay in Cleethorpes: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a lift and re-lay job cost in Cleethorpes?

Our guide is £30–£70 per m² including VAT. Small repairs are often priced from photos.

Do you cover Grimsby, Hull and Brough?

Yes. We cover Cleethorpes and the places around it, including Grimsby, Hull and Brough, and the rest of Lincolnshire.

Lift and re-lay near Cleethorpes

Nearby towns we cover for lift and re-lay, and lift and re-lay across Lincolnshire:

Other block paving services in Cleethorpes

Or see all block paving services in Cleethorpes.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Cleethorpes, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote