What to know before a replacement block drive in Grimsby
Grimsby has a big mix of housing, from older terraces near the centre to newer estates further out, so no two drives here start from the same ground.
Yorkshire has everything from stone-built terraces to large new estates, so block choice often follows the house: clay or tumbled blocks for older homes, crisp concrete for newer ones.
How much does a replacement block drive cost in Grimsby?
Expect replacement block drives in Grimsby to come in at around £85–£160 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £3,850 and £7,300.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £85–£160 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- New edging, sub-base where needed, and the block drive
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
What we check on a Grimsby survey
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Ground conditions under the old surface and how deep the sub-base must be
- Trees and roots near the drive
- Block range, thickness, colour and pattern to suit the house
Do you need permission in Grimsby?
Grimsby is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Replace an old drive in Grimsby: questions
Do you cover Cleethorpes and Scunthorpe?
Yes. We cover Grimsby and the places around it, including Cleethorpes and Scunthorpe, and the rest of Lincolnshire.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a replacement block drive in Grimsby?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Grimsby?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Replace an old drive near Grimsby
Nearby towns we cover for replace an old drive, and replace an old drive across Lincolnshire:
