Greater London · Replace an old drive

Replacing tarmac or concrete with block paving in Eltham

Our replacing tarmac or concrete with block paving service covers Eltham and nearby Welling, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes SE9, SE12, BR7
  • £115–£215 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

Planning a replacement block drive in Eltham

Homes in Eltham include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.

How much does a replacement block drive cost in Eltham?

Guide price in Eltham£115–£215 per m²Including VAT at 20%

Expect replacement block drives in Eltham to come in at around £115–£215 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £5,150 and £9,700.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£115–£215 per m²
Breaking out an old surface£12–£50 per m²
Edging or kerb, bedded and haunched£25–£60 per metre
Typical channel drain run£420–£1,200
Dropped kerb (vehicle crossover) construction£1,200–£3,600

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Break-out of the old surface with waste removal and skip or grab lorry
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • Assessment of the old base: keep, top up or replace
  • New edging, sub-base where needed, and the block drive

What we check on an Eltham survey

  • Where an electric vehicle charger cable might run
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Access for a mini-digger, skip or grab lorry
  • Existing manhole and inspection covers, and whether to recess them
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Rules for front drives in Eltham

Eltham is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Replace an old drive in Eltham: questions

How long does a replacement block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do you cover Welling, Catford and Greenwich?

Yes. We cover Eltham and the places around it, including Welling, Catford and Greenwich, and the rest of Greater London.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Eltham?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Replace an old drive near Eltham

Nearby towns we cover for replace an old drive, and replace an old drive across Greater London:

Other block paving services in Eltham

Or see all block paving services in Eltham.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote