Greater London · Replace an old drive

Replacing tarmac or concrete with block paving in Catford

Thinking about replacement block drives in Catford? We survey, specify and build them for homeowners across Catford and the surrounding SE postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes SE6, SE13, SE4
  • £115–£215 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Catford

Catford is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.

How much does a replacement block drive cost in Catford?

Guide price in Catford£115–£215 per m²Including VAT at 20%

Expect replacement block drives in Catford to come in at around £115–£215 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £5,150 and £9,700.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£115–£215 per m²
Breaking out an old surface£12–£50 per m²
Edging or kerb, bedded and haunched£25–£60 per metre
Typical channel drain run£420–£1,200
Dropped kerb (vehicle crossover) construction£1,200–£3,600

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.

  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry
  • New edging, sub-base where needed, and the block drive
  • Assessment of the old base: keep, top up or replace

What the survey covers

  • Access for a mini-digger, skip or grab lorry
  • Ground conditions under the old surface and how deep the sub-base must be
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Block range, thickness, colour and pattern to suit the house
  • Where an electric vehicle charger cable might run

Do you need permission in Catford?

Catford is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Replace an old drive in Catford: questions

Do you cover Greenwich, Beckenham and Peckham?

Yes. We cover Catford and the places around it, including Greenwich, Beckenham and Peckham, and the rest of Greater London.

How much does a replacement block drive cost in Catford?

Our guide for Catford is £115–£215 per m² including VAT, so a 45 m² replacement drive is usually about £5,150–£9,700. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Do I need planning permission for a replacement block drive in Catford?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Replace an old drive near Catford

Nearby towns we cover for replace an old drive, and replace an old drive across Greater London:

Other block paving services in Catford

Or see all block paving services in Catford.

Next step

Get a guide price in two minutes

Ready to talk about your replacement block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote