Planning a replacement block drive in Brentwood
In Brentwood, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a replacement block drive cost in Brentwood?
Guide price in Brentwood: £100–£190 per m² including VAT, which puts a 45 m² replacement drive at about £4,500–£8,500. These are East of England guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Drainage added where the old drive sent water to the house or road
- New edging, sub-base where needed, and the block drive
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- Where an electric vehicle charger cable might run
- Edges against lawns, beds, walls and neighbours
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
- Trees and roots near the drive
Rules for front drives in Brentwood
Brentwood is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Replace an old drive in Brentwood: questions
Do I need planning permission for a replacement block drive in Brentwood?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Billericay, Basildon and South Ockendon?
Yes. We cover Brentwood and the places around it, including Billericay, Basildon and South Ockendon, and the rest of Essex.
Is the survey in Brentwood free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Replace an old drive near Brentwood
Nearby towns we cover for replace an old drive, and replace an old drive across Essex:
- Replace an old drive in Billericay
- Replace an old drive in Basildon
- Replace an old drive in South Ockendon
- Replace an old drive in Stanford-le-Hope
- Replace an old drive in Wickford
- Replace an old drive in Pitsea
