Planning a block paved driveway in Brentwood
Homes in Brentwood include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paved driveway cost in Brentwood?
In the East of England, a block paved driveway usually costs £90–£145 per m² including VAT. For a 50 m² double drive, that is roughly £4,450–£7,350. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £90–£145 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved driveway involve?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Survey, measurements and a written, itemised quote
- Sharp-sand laying course screeded to falls
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Cuts at edges, around covers and against the house
- Blocks laid in your chosen pattern, with a contrasting border if wanted
What we check on a Brentwood survey
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- The kerb: is it already dropped, and is it wide enough?
- Block range, thickness, colour and pattern to suit the house
Planning and kerb rules in Brentwood
Brentwood is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Block paved driveways in Brentwood: questions
Do you cover Billericay, Basildon and South Ockendon?
Yes. We cover Brentwood and the places around it, including Billericay, Basildon and South Ockendon, and the rest of Essex.
Can you match the blocks to my house in Brentwood?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a block paved driveway cost in Brentwood?
Our guide for Brentwood is £90–£145 per m² including VAT, so a 50 m² double drive is usually about £4,450–£7,350. Your fixed price follows the survey.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Brentwood
Nearby towns we cover for block paved driveways, and block paved driveways across Essex:
- Block paved driveways in Billericay
- Block paved driveways in Basildon
- Block paved driveways in South Ockendon
- Block paved driveways in Stanford-le-Hope
- Block paved driveways in Wickford
- Block paved driveways in Pitsea
