Block paving driveways in Pitsea: the local picture
Homes in Pitsea include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
Flat ground across much of the East means falls have to be built in carefully so water does not sit on the drive.
How much does a block paved driveway cost in Pitsea?
Most block paved driveway quotes in the East of England fall within £90–£145 per m² including VAT. A 50 m² double drive would usually be about £4,450–£7,350, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £90–£145 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
- Crushed-stone sub-base laid in layers and compacted
- Blocks laid in your chosen pattern, with a contrasting border if wanted
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Sharp-sand laying course screeded to falls
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
Before we price your block paved driveway
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
- Edges against lawns, beds, walls and neighbours
- Where an electric vehicle charger cable might run
Do you need permission in Pitsea?
Pitsea is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Block paved driveways in Pitsea: questions
Do I need planning permission for a block paved driveway in Pitsea?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Is the survey in Pitsea free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do you cover Basildon, South Benfleet and Wickford?
Yes. We cover Pitsea and the places around it, including Basildon, South Benfleet and Wickford, and the rest of Essex.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Pitsea
Nearby towns we cover for block paved driveways, and block paved driveways across Essex:
- Block paved driveways in Basildon
- Block paved driveways in South Benfleet
- Block paved driveways in Wickford
- Block paved driveways in Canvey Island
- Block paved driveways in Stanford-le-Hope
- Block paved driveways in Rayleigh
