Replacing tarmac or concrete with block paving in Pitsea: the local picture
In Pitsea, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
How much does a replacement block drive cost in Pitsea?
In the East of England, a replacement block drive usually costs £100–£190 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,500–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £100–£190 per m² |
| Breaking out an old surface | £11–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £370–£1,050 |
| Dropped kerb (vehicle crossover) construction | £1,050–£3,150 |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our replace an old drive service
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- Drainage added where the old drive sent water to the house or road
- Levels set below the damp-proof course with falls away from the house
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
- Trees and roots near the drive
- Ground conditions under the old surface and how deep the sub-base must be
Rules for front drives in Pitsea
Pitsea is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Replace an old drive in Pitsea: questions
Is the survey in Pitsea free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a replacement block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a replacement block drive in Pitsea?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Do you cover Basildon, South Benfleet and Wickford?
Yes. We cover Pitsea and the places around it, including Basildon, South Benfleet and Wickford, and the rest of Essex.
Replace an old drive near Pitsea
Nearby towns we cover for replace an old drive, and replace an old drive across Essex:
- Replace an old drive in Basildon
- Replace an old drive in South Benfleet
- Replace an old drive in Wickford
- Replace an old drive in Canvey Island
- Replace an old drive in Stanford-le-Hope
- Replace an old drive in Rayleigh
