Lift and re-lay block paving in Brentwood: what to expect
Brentwood is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Clay soils are common in parts of the East of England, so drainage and sub-base depth get extra attention.
How much does a lift and re-lay job cost in Brentwood?
In the East of England, a lift and re-lay job usually costs £35–£85 per m² including VAT. For 30 m² re-laid, that is roughly £1,100–£2,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£85 per m² |
| Small repair (a few blocks or a short trench) | £210–£680 |
| Sunken or rutted patch repaired | £320–£1,250 |
| Lift and re-lay with sub-base rebuilt | £65–£115 per m² |
Guide figures for the East of England, checked 9 November 2026. See all prices or use the guide price tool.
What does a lift and re-lay job involve?
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Jointing sand and compaction
- Sub-base repaired or rebuilt where needed
- New screeded laying course
- Blocks relaid, new cuts made, edges re-set
- Lifting, cleaning and stacking
What we look at first in Brentwood
- What caused the dip or movement: base, laying course, edging or drains
- How much of the area needs lifting to blend the repair
- Replacement blocks or hidden blocks to swap in
- Falls, so water does not collect again
- Condition and thickness of your existing blocks
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Lift and re-lay in Brentwood: questions
How much does a lift and re-lay job cost in Brentwood?
Our guide is £35–£85 per m² including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Brentwood without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Lift and re-lay near Brentwood
Nearby towns we cover for lift and re-lay, and lift and re-lay across Essex:
- Lift and re-lay in Billericay
- Lift and re-lay in Basildon
- Lift and re-lay in South Ockendon
- Lift and re-lay in Stanford-le-Hope
- Lift and re-lay in Wickford
- Lift and re-lay in Pitsea
