What to know before a replacement block drive in Milford Haven
In and around Milford Haven, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a replacement block drive cost in Milford Haven?
Most replacement block drive quotes in Wales fall within £90–£165 per m² including VAT. A 45 m² replacement drive would usually be about £4,000–£7,550, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
- Drainage added where the old drive sent water to the house or road
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- Levels set below the damp-proof course with falls away from the house
What the survey covers
- Whether front-garden planning rules apply
- Steps, thresholds and door heights
- The kerb: is it already dropped, and is it wide enough?
- Existing manhole and inspection covers, and whether to recess them
- Edges against lawns, beds, walls and neighbours
Planning and kerb rules in Milford Haven
Milford Haven is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Replace an old drive in Milford Haven: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do I need planning permission for a replacement block drive in Milford Haven?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Milford Haven?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Pembroke Dock and Haverfordwest?
Yes. We cover Milford Haven and the places around it, including Pembroke Dock and Haverfordwest, and the rest of Dyfed.
Replace an old drive near Milford Haven
Nearby towns we cover for replace an old drive, and replace an old drive across Dyfed:
