Planning a driveway extension in Milford Haven
Milford Haven is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a driveway extension cost in Milford Haven?
In Wales, a driveway extension usually costs £85–£140 per m² including VAT. For a 15 m² extension, that is roughly £1,450–£2,400. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Driveway extension in block paving | £85–£140 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a driveway extension involve?
The hard part is the join. Blocks from the same range can differ in shade from a batch made years ago, and older blocks have weathered, so the survey looks at whether a close match is possible, whether lifting and re-mixing some existing blocks will help, or whether a deliberate border or contrasting panel will look better than a near-miss.
- New edging, kerbs or a low retaining edge where the lawn is cut back
- Joint sand, compaction and a clean-down of the old section
- Dig-out and sub-base for the new area
- Old edge restraint taken out and the new paving toothed into the old pattern
- Matching options: same range, re-mixing old and new, or a planned contrast
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- Access for a mini-digger, skip or grab lorry
- Existing manhole and inspection covers, and whether to recess them
- Trees and roots near the drive
- Whether front-garden planning rules apply
Planning and kerb rules in Milford Haven
Milford Haven is in Wales, so these rules apply:
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Drive extensions in Milford Haven: questions
How much does a driveway extension cost in Milford Haven?
Our guide for Milford Haven is £85–£140 per m² including VAT, so a 15 m² extension is usually about £1,450–£2,400. Your fixed price follows the survey.
Do I need planning permission for a driveway extension in Milford Haven?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Milford Haven?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do you cover Pembroke Dock and Haverfordwest?
Yes. We cover Milford Haven and the places around it, including Pembroke Dock and Haverfordwest, and the rest of Dyfed.
Drive extensions near Milford Haven
Nearby towns we cover for drive extensions, and drive extensions across Dyfed:
