Planning a lift and re-lay job in Milford Haven
In and around Milford Haven, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.
How much does a lift and re-lay job cost in Milford Haven?
Expect lift and re-lay jobs in Milford Haven to come in at around £35–£75 per m², including VAT at 20%. As an example, 30 m² re-laid usually comes to between £980 and £2,250.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£75 per m² |
| Small repair (a few blocks or a short trench) | £185–£600 |
| Sunken or rutted patch repaired | £280–£1,100 |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a lift and re-lay job involve?
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Survey of the blocks: thickness, damage and whether they are worth re-using
- New screeded laying course
- Blocks relaid, new cuts made, edges re-set
- Sub-base repaired or rebuilt where needed
- Lifting, cleaning and stacking
What we look at first in Milford Haven
- What caused the dip or movement: base, laying course, edging or drains
- Replacement blocks or hidden blocks to swap in
- Falls, so water does not collect again
- Whether a drain or gully is leaking under the paving
- Whether the edging has moved or was never set in concrete
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Lift and re-lay in Milford Haven: questions
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Pembroke Dock and Haverfordwest?
Yes. We cover Milford Haven and the places around it, including Pembroke Dock and Haverfordwest, and the rest of Dyfed.
Can you repair block paving in Milford Haven without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Lift and re-lay near Milford Haven
Nearby towns we cover for lift and re-lay, and lift and re-lay across Dyfed:
