How much does a replacement block drive cost in Dyfed?
In Wales, a replacement block drive usually costs £90–£165 per m² including VAT. For a 45 m² replacement drive, that is roughly £4,000–£7,550. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £90–£165 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Typical channel drain run | £330–£930 |
| Dropped kerb (vehicle crossover) construction | £930–£2,800 |
Guide figures for Wales, checked 9 November 2026.
Towns we cover in Dyfed
Choose a town for local prices and details for replace an old drive:
What is included?
Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
- Assessment of the old base: keep, top up or replace
- Break-out of the old surface with waste removal and skip or grab lorry
- New edging, sub-base where needed, and the block drive
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
- Edges against lawns, beds, walls and neighbours
- Steps, thresholds and door heights
- Access for a mini-digger, skip or grab lorry
Rules for front drives in Dyfed
In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.
Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.
A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Replace an old drive in Dyfed: questions
How much does a replacement block drive cost in Dyfed?
Our guide for Dyfed is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.
Do you cover Llanelli, Ammanford and Aberystwyth?
Yes. We cover all of Dyfed, including Llanelli, Ammanford and Aberystwyth.
Do I need planning permission for a replacement block drive in Dyfed?
In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.
Can you match the blocks to my house in Dyfed?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
