Dyfed · Replace an old drive

Replacing tarmac or concrete with block paving in Carmarthen

Our replacing tarmac or concrete with block paving service covers Carmarthen and nearby Llanelli, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes SA31, SA33, SA32
  • £90–£165 per m² inc VAT
  • Free survey for new paving
Driveway half old cracked tarmac and half new brindle herringbone block paving

What to know before a replacement block drive in Carmarthen

In and around Carmarthen, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.

How much does a replacement block drive cost in Carmarthen?

Guide price in Carmarthen£90–£165 per m²Including VAT at 20%

Expect replacement block drives in Carmarthen to come in at around £90–£165 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £4,000 and £7,550.

ItemGuide price inc VAT
Replace tarmac or concrete with block (incl. break-out)£90–£165 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What does a replacement block drive involve?

Sometimes the old base can be kept: a thick, sound concrete or well-compacted hardcore layer may only need trimming and topping up. Often it cannot, because it was too thin, has sunk or sits too high against the house. The survey checks levels against the damp-proof course and the existing base before the quote is written, so the price reflects the real dig.

  • Assessment of the old base: keep, top up or replace
  • Drainage added where the old drive sent water to the house or road
  • Levels set below the damp-proof course with falls away from the house
  • Break-out of the old surface with waste removal and skip or grab lorry
  • New edging, sub-base where needed, and the block drive

Before we price your replacement block drive

  • Trees and roots near the drive
  • Existing manhole and inspection covers, and whether to recess them
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Block range, thickness, colour and pattern to suit the house
  • Ground conditions under the old surface and how deep the sub-base must be

Rules for front drives in Carmarthen

Carmarthen is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Replace an old drive in Carmarthen: questions

Do you cover Llanelli and Ammanford?

Yes. We cover Carmarthen and the places around it, including Llanelli and Ammanford, and the rest of Dyfed.

How much does a replacement block drive cost in Carmarthen?

Our guide for Carmarthen is £90–£165 per m² including VAT, so a 45 m² replacement drive is usually about £4,000–£7,550. Your fixed price follows the survey.

Do I need planning permission for a replacement block drive in Carmarthen?

In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.

Can you match the blocks to my house in Carmarthen?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Replace an old drive near Carmarthen

Nearby towns we cover for replace an old drive, and replace an old drive across Dyfed:

Other block paving services in Carmarthen

Or see all block paving services in Carmarthen.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote