Replacing tarmac or concrete with block paving in Stanley: the local picture
In Stanley, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a replacement block drive cost in Stanley?
Expect replacement block drives in Stanley to come in at around £85–£160 per m², including VAT at 20%. As an example, a 45 m² replacement drive usually comes to between £3,850 and £7,300.
| Item | Guide price inc VAT |
|---|---|
| Replace tarmac or concrete with block (incl. break-out) | £85–£160 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a replacement block drive involve?
Replacing an old drive with block paving means breaking out the existing tarmac, concrete or gravel, checking what is underneath, and then building a block drive on a sound base. Many older tarmac and concrete drives have cracked, sunk or broken up, which is why this is such a common way into block paving.
- New edging, sub-base where needed, and the block drive
- Assessment of the old base: keep, top up or replace
- Levels set below the damp-proof course with falls away from the house
- Drainage added where the old drive sent water to the house or road
- Break-out of the old surface with waste removal and skip or grab lorry
What the survey covers
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Existing manhole and inspection covers, and whether to recess them
- Edges against lawns, beds, walls and neighbours
- The kerb: is it already dropped, and is it wide enough?
- Access for a mini-digger, skip or grab lorry
Do you need permission in Stanley?
Stanley is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Replace an old drive in Stanley: questions
Is the survey in Stanley free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Do I need planning permission for a replacement block drive in Stanley?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a replacement block drive cost in Stanley?
Our guide for Stanley is £85–£160 per m² including VAT, so a 45 m² replacement drive is usually about £3,850–£7,300. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Replace an old drive near Stanley
Nearby towns we cover for replace an old drive, and replace an old drive across County Durham:
- Replace an old drive in Chester-le-Street
- Replace an old drive in Consett
- Replace an old drive in Durham
- Replace an old drive in Seaham
- Replace an old drive in Bishop Auckland
- Replace an old drive in Peterlee
