Block paving cleaning in Stanley: the local picture
Stanley is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a block paving cleaning job cost in Stanley?
In the North East, a block paving cleaning job usually costs £2.50–£4.50 per m² including VAT. For a 50 m² drive, that is roughly £115–£225. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
| Sealing only | £4.50–£14 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Weeds and moss removed from the joints
- Rinse down of edges, steps and walls
- Optional biocide and sealer
What we look at first in Stanley
- Type of block and its age
- Which sealer finish suits a slope or patio
- Walls, doors and planting to protect
- Shade and drainage, which affect regrowth
- Whether the paving is permeable (no sand, no sealing with the wrong product)
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Cleaning in Stanley: questions
How much does a block paving cleaning job cost in Stanley?
Guide price for Stanley: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Stanley be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Cleaning near Stanley
Nearby towns we cover for cleaning, and cleaning across County Durham:
- Cleaning in Chester-le-Street
- Cleaning in Consett
- Cleaning in Durham
- Cleaning in Seaham
- Cleaning in Bishop Auckland
- Cleaning in Peterlee
