Block paving cleaning in Bishop Auckland: what to expect
Bishop Auckland is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a block paving cleaning job cost in Bishop Auckland?
In the North East, a block paving cleaning job usually costs £2.50–£4.50 per m² including VAT. For a 50 m² drive, that is roughly £115–£225. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
| Sealing only | £4.50–£14 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Weeds and moss removed from the joints
- Optional biocide and sealer
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Kiln-dried sand brushed in once dry (re-sanding package)
Before we price your block paving cleaning job
- Shade and drainage, which affect regrowth
- Whether any blocks are loose or sunken first
- Which sealer finish suits a slope or patio
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Cleaning in Bishop Auckland: questions
How often should block paving in Bishop Auckland be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving cleaning job cost in Bishop Auckland?
Guide price for Bishop Auckland: £2.50–£4.50 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Cleaning near Bishop Auckland
Nearby towns we cover for cleaning, and cleaning across County Durham:
- Cleaning in Newton Aycliffe
- Cleaning in Durham
- Cleaning in Darlington
- Cleaning in Chester-le-Street
- Cleaning in Stanley
- Cleaning in Consett
