Block paving sealing in Bishop Auckland: the local picture
Bishop Auckland is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a block paving sealing job cost in Bishop Auckland?
Most block paving sealing job quotes in the North East fall within £4.50–£14 per m² including VAT. A 50 m² drive would usually be about £225–£680, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
Before we price your block paving sealing job
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Type of block and its age
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Bishop Auckland: questions
Do you cover Newton Aycliffe, Durham and Darlington?
Yes. We cover Bishop Auckland and the places around it, including Newton Aycliffe, Durham and Darlington, and the rest of County Durham.
How much does a block paving sealing job cost in Bishop Auckland?
Guide price for Bishop Auckland: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How often should block paving in Bishop Auckland be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Bishop Auckland
Nearby towns we cover for sealing, and sealing across County Durham:
- Sealing in Newton Aycliffe
- Sealing in Durham
- Sealing in Darlington
- Sealing in Chester-le-Street
- Sealing in Stanley
- Sealing in Consett
