Lift and re-lay block paving in Bishop Auckland: what to expect
Bishop Auckland is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.
How much does a lift and re-lay job cost in Bishop Auckland?
For Bishop Auckland, our guide is £30–£70 per m² including VAT, so 30 m² re-laid is likely to be £950–£2,150. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £30–£70 per m² |
| Small repair (a few blocks or a short trench) | £180–£590 |
| Sunken or rutted patch repaired | £270–£1,100 |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a lift and re-lay job involve?
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Lifting, cleaning and stacking
- Blocks relaid, new cuts made, edges re-set
- Sub-base repaired or rebuilt where needed
- Jointing sand and compaction
- Survey of the blocks: thickness, damage and whether they are worth re-using
Before we price your lift and re-lay job
- Whether the edging has moved or was never set in concrete
- Whether a drain or gully is leaking under the paving
- What caused the dip or movement: base, laying course, edging or drains
- Replacement blocks or hidden blocks to swap in
- How much of the area needs lifting to blend the repair
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Lift and re-lay in Bishop Auckland: questions
How much does a lift and re-lay job cost in Bishop Auckland?
Our guide is £30–£70 per m² including VAT. Small repairs are often priced from photos.
Can you repair block paving in Bishop Auckland without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Lift and re-lay near Bishop Auckland
Nearby towns we cover for lift and re-lay, and lift and re-lay across County Durham:
- Lift and re-lay in Newton Aycliffe
- Lift and re-lay in Durham
- Lift and re-lay in Darlington
- Lift and re-lay in Chester-le-Street
- Lift and re-lay in Stanley
- Lift and re-lay in Consett
