County Durham · Lift and re-lay

Lift and re-lay block paving in Consett

Before you replace a block drive in Consett, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • Postcodes DH8
  • £30–£70 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Lift and re-lay block paving in Consett: the local picture

Consett is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Former colliery ground and clay soils occur across the North East, so the survey checks for soft spots before the sub-base depth is set.

How much does a lift and re-lay job cost in Consett?

Guide price in Consett£30–£70 per m²Including VAT at 20%

Guide price in Consett: £30–£70 per m² including VAT, which puts 30 m² re-laid at about £950–£2,150. These are North East guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Lift and re-lay on a sound base£30–£70 per m²
Small repair (a few blocks or a short trench)£180–£590
Sunken or rutted patch repaired£270–£1,100
Lift and re-lay with sub-base rebuilt£55–£100 per m²

Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.

  • Lifting, cleaning and stacking
  • Blocks relaid, new cuts made, edges re-set
  • Jointing sand and compaction
  • New screeded laying course
  • Sub-base repaired or rebuilt where needed

How we find the cause

  • Falls, so water does not collect again
  • Replacement blocks or hidden blocks to swap in
  • Whether a drain or gully is leaking under the paving
  • What caused the dip or movement: base, laying course, edging or drains
  • Whether the edging has moved or was never set in concrete

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Lift and re-lay in Consett: questions

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Can you repair block paving in Consett without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Do you cover Stanley, Chester-le-Street and Durham?

Yes. We cover Consett and the places around it, including Stanley, Chester-le-Street and Durham, and the rest of County Durham.

How much does a lift and re-lay job cost in Consett?

Our guide is £30–£70 per m² including VAT. Small repairs are often priced from photos.

Lift and re-lay near Consett

Nearby towns we cover for lift and re-lay, and lift and re-lay across County Durham:

Other block paving services in Consett

Or see all block paving services in Consett.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Consett, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote