What to know before a permeable block drive in Consett
In Consett, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a permeable block drive cost in Consett?
Guide price in Consett: £95–£155 per m² including VAT, which puts a 50 m² drive at about £4,750–£7,650. These are North East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £95–£155 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Geotextile layer where the design needs one
- Deeper dig-out for the open-graded sub-base
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
- Ground check: how well the soil drains and how high the water table sits
What we check on a Consett survey
- Whether front-garden planning rules apply
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
Planning and kerb rules in Consett
Consett is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Permeable paving in Consett: questions
Is the survey in Consett free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a permeable block drive in Consett?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a permeable block drive cost in Consett?
Our guide for Consett is £95–£155 per m² including VAT, so a 50 m² drive is usually about £4,750–£7,650. Your fixed price follows the survey.
Permeable paving near Consett
Nearby towns we cover for permeable paving, and permeable paving across County Durham:
- Permeable paving in Stanley
- Permeable paving in Chester-le-Street
- Permeable paving in Durham
- Permeable paving in Bishop Auckland
- Permeable paving in Newton Aycliffe
- Permeable paving in Seaham
