Planning a block paved patio in Stanley
Homes in Stanley include plenty of semis and detached houses with gardens big enough for a patio and a path to the gate.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a block paved patio cost in Stanley?
For Stanley, our guide is £70–£125 per m² including VAT, so a 20 m² patio is likely to be £1,650–£2,900. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Block paved patio (concrete block) | £70–£125 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Step with block or brick riser and paved tread | £160–£320 per step |
| Typical channel drain run | £320–£900 |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved patio involve?
Block suits patios that join a block drive or path, small or awkward spaces where large slabs would need too many cuts, and gardens where you want a pattern such as basketweave or a circle feature. We lay patios to fall away from the house and below the damp-proof course, with edging that stops the blocks creeping into the lawn.
- Layout marked out with you, including steps and doors
- Falls away from the house and doors
- Jointing sand and compaction
- Dig-out and compacted sub-base (around 100 mm for foot traffic)
- Blocks in your pattern, edges and cuts
Before we price your block paved patio
- Manhole and inspection covers in the area
- Trees and roots near the paving
- Steps, walls and changes of level
- Where rain will go: falls away from the house, onto lawn or borders, or into a channel
- Ground conditions and how deep the dig must be
Do you need permission for a block paved patio in Stanley?
A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.
Paving in front of the house follows the front-garden rules: in England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Patios in Stanley: questions
How long does a block paved patio take?
Most patios and paths take two to five working days, depending on the size, any steps and the dig. Your quote gives the expected duration.
Do I need planning permission for a block paved patio in Stanley?
Not usually for a patio or path behind the house. Raised patios, listed buildings and flats can be different, and paving in front of the house follows the front-garden rules. In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary.
Do you cover Chester-le-Street, Consett and Durham?
Yes. We cover Stanley and the places around it, including Chester-le-Street, Consett and Durham, and the rest of County Durham.
What happens to my old patio or lawn?
Old slabs, concrete or turf are dug out and taken away, listed as its own line on your quote.
Patios near Stanley
Nearby towns we cover for patios, and patios across County Durham:
- Patios in Chester-le-Street
- Patios in Consett
- Patios in Durham
- Patios in Seaham
- Patios in Bishop Auckland
- Patios in Peterlee
