Permeable block paving in Oban: the local picture
In and around Oban, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
Work in Argyll and Bute is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a permeable block drive cost in Oban?
In Scotland, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Ground check: how well the soil drains and how high the water table sits
- Grit laying course and permeable blocks with grit-filled joints
- Edge restraints and any overflow or outlet the design needs
- Deeper dig-out for the open-graded sub-base
- Geotextile layer where the design needs one
What the survey covers
- The kerb: is it already dropped, and is it wide enough?
- Where rain will go: falls, lawn, border, channel or soakaway
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
- Whether front-garden planning rules apply
Do you need permission in Oban?
Oban is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Permeable paving in Oban: questions
Do you cover Fort William and Dunoon?
Yes. We cover Oban and the places around it, including Fort William and Dunoon, and the rest of Argyll and Bute.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Is the survey in Oban free?
In Argyll and Bute we cover jobs by arrangement. We will confirm before any visit whether a charge applies, and many jobs can be priced from photos first.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Permeable paving near Oban
Nearby towns we cover for permeable paving, and permeable paving across Argyll and Bute:
