How much does a permeable block drive cost in Argyll and Bute?
Guide price in Argyll and Bute: £105–£170 per m² including VAT, which puts a 50 m² drive at about £5,250–£8,500. These are Scotland guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Argyll and Bute
Choose a town for local prices and details for permeable paving:
What is included?
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Grit laying course and permeable blocks with grit-filled joints
- Geotextile layer where the design needs one
- Open-graded crushed stone (no fines) laid and compacted in layers
- Edge restraints and any overflow or outlet the design needs
- Deeper dig-out for the open-graded sub-base
What the survey covers
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Rules for front drives in Argyll and Bute
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Permeable paving in Argyll and Bute: questions
Do I need planning permission for a permeable block drive in Argyll and Bute?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Argyll and Bute?
Our guide for Argyll and Bute is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Can you match the blocks to my house in Argyll and Bute?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
