Block paving cleaning in Oban: the local picture
Oban is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
Work in Argyll and Bute is by arrangement: we confirm availability and any travel charge before a visit, and many jobs can be priced from photos first.
How much does a block paving cleaning job cost in Oban?
Most block paving cleaning job quotes in Scotland fall within £2.50–£5 per m² including VAT. A 50 m² drive would usually be about £125–£250, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving cleaning job involve?
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Weeds and moss removed from the joints
- Kiln-dried sand brushed in once dry (re-sanding package)
- Rotary surface clean at a pressure that will not blow out the joints
- Rinse down of edges, steps and walls
- Pre-treatment where needed
How we find the cause
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Type of block and its age
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Cleaning in Oban: questions
How much does a block paving cleaning job cost in Oban?
Guide price for Oban: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Fort William and Dunoon?
Yes. We cover Oban and the places around it, including Fort William and Dunoon, and the rest of Argyll and Bute.
Cleaning near Oban
Nearby towns we cover for cleaning, and cleaning across Argyll and Bute:
